AccuPoint Positioners
for Static Applications
– Puts You in Control!
Introducing the AccuPoint range of positioners, retaining everything that was great about the original static mounted range but now includes our improved next generation control electronics. The new AccuPoint positioners have higher positional accuracy and are easier to use than ever. With a greater level of motor control, your surveillance capability will be at its highest and antenna accuracy will be precise. Supplied with a simple graphic interface (GUI), it is now easier to configure allowing faster installation times and more capabilities to fulfill your specifications. Know the exact pointing location of your device with positional feedback and adjust it easily to the direction needed.
The AccuPoint series is dimensionally and electrically identical to the first generation of Will-Burt positioners with backwards compatible software. Improved motor control is assured with higher resolution speed control, slower minimum speeds, and user adjustable min speeds and speed ramps. The new GUI for configuring and commissioning allows users to set home positions, receive position feedback, and adjust many other features that were originally factory set standards. Rugged and robust as ever before, AccuPoint can withstand the harshest weather conditions.
The naming convention for AccuPoint is easier than ever with each positioner being labeled with its payload capacity – AP-8, AP-30, and AP-50. Available in these three sizes, all units can be configured for over the top or side mount operation.
If your application calls for the ultimate in maintenance-free all-weather performance, look no further. Contact a sales representative for more information.
Essential Features
- Backwards compatible
- Greater level of control with user set features
- Higher level of motor control and greater positional accuracy
- Faster setup
- Positional feedback
- Rugged and robust
- Pelco D over RS485 Communications
- IP68 Rated
- 3 year warranty
Improved Features
Feature | Original | *New* AccuPoint |
---|---|---|
Setting Address | Factory Set Option | User Set via GUI |
Setting Baud Rate | Factory Set Option | User Set via GUI |
‘Stow/Unstow’ or ‘Std Preset 1 & 2’ | Factory Set Option | User Set via GUI |
Selectable Protocols | Factory Set Option | User Set via GUI |
Pan and Tilt Invert | Special Order | User Set via GUI |
Updating Firmware | Return to factory | User Set via GUI |
Adjustable Home Position | Not available | User Set via GUI |
Tare-able Absolute Positioning Feedback | Not available | User Set via GUI |
Wash Position | Not available | User Set via GUI |
Adjustable RS485 TX / RX Timings | Not available | User Set via GUI |
Adjustable Min Speed | Not available | User Set via GUI |
Adjustable Speed Ramp | Not available | User Set via GUI |
Specifications
Model | AP-50 | AP-30 | AP-8 | |||
---|---|---|---|---|---|---|
Mounting Option | Side Mount | Over The Top | Side Mount | Over The Top | Side Mount | Over The Top |
Height (Standard) | 9.3 in. / 235.1 mm | 9.8 in. / 248.1 mm | 7.4 in. / 187 mm | 8 in. / 204 mm | 5.2 in. / 131 mm | 5.8 in. / 146.2 mm |
Platform Width | 7 in. / 177.2 mm | 9.2 in. / 234 mm | 7 in. / 178.7 mm | 7.8 in. / 197 mm | 6.4 in. / 162.1 mm | 5.8 in. / 147 mm |
Total Width | 15.8 in. / 400.9 mm | 9.6 in. / 243.6 mm | 14.6 in. / 369.8 mm | 8.2 in. / 207.5 mm | 12.2 in. / 309.5 mm | 6.2 in. / 158.1 mm |
Depth (without plugs) | 7 in. / 177 mm | 7 in. / 177 mm | 6 in. / 152.8 mm | 5.9 in. / 149.64 mm | 5.2 in. / 132 mm | 5 in. / 127 mm |
Weight | ||||||
Voltages | 24 VDC - Converters available for 12 VDC and AC power sources |
24 VDC - Converters available for 12 VDC and AC power sources |
24 VDC - Converters available for 12 VDC and AC power sources |
|||
Pan Gear Box Speed (Max) | 30°/sec | 48°/sec | 24°/sec | |||
Tilt Gear Box Speed (Max) | 10°/sec | 12°/sec | 6°/sec | |||
Capacity | 50 ft-lb | 30 ft-lb | 8 ft-lb | |||
Pan Range | ±180° | ±180° | ±180° | |||
Tilt Range | ±90° | +90° / -45° | ±90° | +90° / -45° | ±90° | +90° / -45° |
Backlash | 0.15° | 0.15° | 0.15° | |||
Repeatability | 0.3° | |||||
Ingress Protection | IP68 | IP68 | IP68 | |||
Temperature Range | -4° to 122° F / -20° to +50° C | -4° to 122° F / -20° to +50° C | -4° to 122° F / -20° to +50° C | |||
Max Current Draw | 1.85 A | 1.85 A | 0.85 A | |||
Protocol | RS485 / PELCO D | RS485 / PELCO D | RS485 / PELCO D | |||
Absolute Positioning | Yes | Yes | Yes | |||
Positional Feedback | Yes | Yes | Yes | |||
Application | Static Mount | Static Mount | Static Mount | |||
Housing Color | Grey | Grey | Grey | |||
Addresses | User Set via GUI | User Set via GUI | User Set via GUI | |||
2D Customer Drawing | 2D Customer Drawing | 2D Customer Drawing | 2D Customer Drawing | 2D Customer Drawing | 2D Customer Drawing | 2D Customer Drawing |