Specifications

HotStick AC Voltage Detector Specifications

• • Sensitivity, externally switchable:
    • 3 settings
  • Detection Range:
    • The detection range or sensitivity is defined as the distance between the HotStick AC Voltage Detector and the wire conductor with the HotStick positioned for maximum indication. Signal “detection ” shall be defined as a beeping rate of at least one indication every 2 seconds.
  • Typical Detection Distance in meters /(feet ):
    

    			Mode Switch Setting
    Voltage	Frequency	Setup	High Sensitivity	Low Sensitivity	Focused Setting
    120 VAC 220 VAC	60 Hz 50 Hz	Single conductor (6′ above ground)	4.6m (15′)	0.9m (3′)	150mm (0.5′)
    120 VAC 220 VAC	60 Hz 50 Hz	Conductor laying on wet soil	0.9m (3′)	150mm (0.5′)	25mm (0.1′ )
    7.2 kV 16 kV	60 Hz 50 Hz	Overhead distribution line (single insulator)	65m (210′)	21m (70′)	6m (20′)
    46 kV	60 Hz	Overhead transmission line (several insulators)	>150m (>500′)	>60m (>200′)	>20m (>70′)

  • Signal Indication
    • Audible (beep) and visual (LED)
    • Beep rate will increase (or decrease)
  • Frequency Range
    • C Voltages 20 Hz to 100 Hz
  • Self-Test
    • Built-in, 3-second self-test after turn-on.
  • Insulation:
    • PVC plastic housing. (Note: Direct contact with high tension wires should be avoided)
  • Safety:
    • Designed for intrinsically safe operation
  • Batteries:
    • 4× AA alkaline batteries, NEDA 15A, Duracell MN1500 or equivalent
  • Battery Life:
    • Continuous use: 300 hours, typical use: 1 year
  • Battery Check:
    • Built-in low voltage warning
  • Battery Change:
    • Requires removal of lanyard
  • Water Resistance:
    • Splashwater-proof
  • Temperature Range:
    • Operating:
      • -30 to +50°C (-22 to +122°F)
    • Storage & transport:
      • −40 to +70°C (−40 to +158°F)
  • Size:
    • 45 mm (1 3⁄4′′ ) diameter × 521 mm (20 1⁄2″) long
  • Weight, including batteries:
    • 570 grams (1 lb. 4 oz.)
  • Shipping weight:
    • 910 grams (2 lbs.)